In previous posts I wrote about to add disks to a volume when it was degraded. Last week I walked in to the issue that i had 6 disks added to a volume which wasn’t available to erase. Unless we had to go back to Factory defaults. Which wasn’t an option. You have to login […]
Netgear | ReadyData disk format cli for new volume Read More »
Recently it happened to a customer where I go to time to time. That the storage of the Ready data 5200 was full. And we were not able to delete any of the files because there was no free space. This is a horrible problem if you want to free up some space. Although the
Netgear | Readydata 5200 | out of storage Read More »
In my previous post in april I figured out how to upgrade the software step by step. In the mean time I found out it’s possible to do this in once. You need to setup first some tools before you can start. Have a TFTP and a FTP Server TFTP server needs to contain the
Cisco ASA – SourceFire 5506-X | direct upgrade to latest build Read More »
Yesterday I started to configure and try a Cisco ASA 5508-X with firepower. With the Cisco ASA 5506-X with firepower i knew already that it would take some time to update the firepower software. Now with this new device I had some time to see and test. I started yesterday early afternoon the general configuration
Cisco | ASA 5508 with Firewpower Read More »
Lately I’m busy to configure Cisco IOS routers in combination with Remote offices where we place Meraki Appliances (like the MX64, MX65 or the Z1) When we do this we create also a VPN connection (site to site). In this setup the Main office has a Cisco IOS router. Configuration of the Main Office. (Cisco
Recently a customer had to replace a disk in the ReadyData 5200. How ever the disk came online but wasn’t available for rebuilding of the raid array. I needed to contact L3 support for further help. The fix they supplied was easier than I thought, I followed the commands which the engineer used. You need to
Netgear – Rebuild raid-set of a ReadyData 5200 Read More »
HP 1900 Switch series. Command Line login option.
HP Switch Serie 1900 login methods Read More »
Updating Global address list warning messages. I was running the following command Update-GlobalAddressList – identity “Default Global Address List” when I received the following warning messages. “WARNING: The Recipient “<domainname>/Microsoft Exchange System objects/OAB version 2″ is invalid and couldn’t be updated.” This warning occurs in my situation way after the migration of exchange 2007 to exchange
Microsoft | Exchange 2013 update Global Address List Warning messages Read More »
Recently I configured SNMP via the Group Policy. How ever by default you are not able to uncheck the Sent Authentication Trap function in the SNMP Serivce Settings. To do this you need to follow the following steps to complete this. Computer Configuration\Policies\Administrative Templates definitions\Network\SNMP\Specify communities. Enable this GPO and enter at Communities your own
Microsoft | SNMP settings via Group Policy Read More »
Cisco ASA Configuration part When you want to connect to a Juniper Netscreen SG5 device which has a Dynamic IP address. It can be difficult to find what the correct specs are for this type of setup. First you need to go: Configuration > site-to-site VPN > advanced > Tunnel-Groups You have to edit the
Cisco ASA | Juniper site-to-dynamic VPN Read More »