I think some people already know but it could be useful to know. How to start powershell when you already opened a command line prompt Run a command prompt in adminsitrative mode To activate powershell. You need to enter the command: Powershell if you type the command: get-help get (You will get all the powershell […]
Windows | Start powershell direct in the Command Prompt Read More »
Basic information The Cisco IOS router contains the IOS version c2900-universalk9-mz.SPA.152-4.M4.bin. Both Cisco ASA’s 5505 contains the ASA software version 8.0(5) The Scenario will look like this: First I will explain the configuration of the IOS router. Cisco IOS 2921 configuration First the vpn configuration (site to site). This configuration contains also a VPN Client
Cisco | How to connect 2 Cisco ASA’s 5505 to a Cisco IOS Router 2921 Read More »
you have a wrong routing table in the MailMarshal Configurator. And you want to delete this routing table name. In the example above you see a routing table which should be needed to deleted. When you click to delete this routing table you might getting the following error. Click on oke. close the Mailmarshal configurator.
Mailmarshal | Unable to delete the route table "name" Read More »
When you recieve the following error in your eventlog on your Exchange 2010 server Log Name: Application Source: MSExchangeTransport Date: 4-10-2013 7:45:15 Event ID: 12014 Task Category: TransportService Level: Error Keywords: Classic User: N/A Computer: XCH01.<servername>.local Description: Microsoft Exchange could not find a certificate that contains the domain name XCH01.<servername>.local in the personal store on
How to setup Radius for authentication with for example a Cisco VPN Connection. When opening the Dashboard after logon with the administrator user you have to choose Add roles and features Choose Role-Based or feature-based installation and click on next Select the server which get the new feature and click on next Select network Policy
Microsoft | Windows Server 2012 Radius setup Read More »
Start up VEEAM Choose Backup Copy Name the backup and select how often you want to copy a backup. Choose the time also. click on next Select a backup via ADD Select the repository where to backup and select how many restore points you want Select Through build-in WAN Accelerators. Select the local WAN accelerator
VEEAM | Create Backup with WAN Accelerator Read More »
How to configure VEEAM WAN Accelerator. Start VEEAM and go to backup Infrastructure > select WAN Accelators > Add WAN Accelerator Select the server where to you want to create this WAN Accelerator > Click on Next Wait till VEEAM is finished the Detecting the server operating system Select the Drive where the Cache folder
VEEAM | How to configure VEEAM WAN Accelerator. Read More »
How to configure DHCP Relay on a HP A5120 switch. To do this you need to go in the system-view of the switch. As followed you need to configured the DHCP Option in the switch. You can do this by: # dhcp enable # Now you need to configure a Server-group where you configure the
HP A5120 Switch | DHCP Relay Read More »
How to connect a HP A5120 switch to a Cisco Small Business Switch 302-8 ( SRW208-8p) First the part of the cisco switch. In my configuration I had more than 1 vlan’s. I wanted that only vlan 1 to 3 are forwarded to the other switch. To do this you need to configure the following
Cisco to HP | Connect a HP A5120 Switch to a Cisco SMB 302-8P Read More »
Installation Message when trying Rollup 2 on Exchange 2010 Service Pack 3 When you are trying to upgrade Microsoft Exchange 2010 SP3 to Rollup 2. You can get a message that Rollup 2 is looking for the file Exchangeserver.msi ( this is a file which you can find in the Service Pack 3 installation files).
Microsoft Exchange 2010| Service Pack 3 Rollup 2 Installation Message Read More »