Configuration Example Wireless for a Cisco Router 87xW

Below I put an example configuration of enabling the Wireless functionality of the Cisco Router Series 870W.
This configuration is easier than what your options are in the webinterface. And now you can disable also the ip http server on the router with no ip http server.

dot11 syslog
!
dot11 ssid EXAMPLE
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii EXAMPLE

interface Dot11Radio0
description Radio Interface
no ip address
no ip route-cache cef
no ip route-cache

encryption mode ciphers tkip
ssid EXAMPLE
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
world-mode dot11d country NL both
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding

bridge irb
bridge 1 protocol ieee
bridge 1 route ip

interface Vlan1
no description LAN ( Description )
no  ip address < IP Address > < Subnet>
no  ip nat inside
no  ip virtual-reassembly
no  ip route-cache same-interface
no  ip route-cache policy
no  ip route-cache flow
no  hold-queue 100 in
no  hold-queue 100 out
no ip address
no ip proxy-arp
bridge-group 1

interface bvi1
description LAN ( Description )
ip address < IP Address > < Subnet>
ip nat inside
no shutdown
ip virtual-reassembly
ip route-cache same-interface
ip route-cache policy
ip route-cache flow
hold-queue 100 in
hold-queue 100 out

2 thoughts on “Configuration Example Wireless for a Cisco Router 87xW”

  1. Hello there,
    I seem to have deleted the boot file (.bin) and cannot download it from Cisco apparently.
    Do you have any recommendation as to what I can do?
    I am receiving the below message:
    System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 2006 by cisco Systems, Inc.
    C870 series (Board ID: 1-148) platform with 131072 Kbytes of main memory
    PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
    No bootable image file: flash:/
    Unable to open boot file
    Regards,
    Josh

    1. You can try to google the version maybe someone put it online (not legal but a try worth) otherwise you need to request a tac maybe they can supply the version for your device.

Leave a Reply to Josh Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: