HP v1910 Secret Commando list ( how to enable it )

Make a Telnet ( when enabled or via the console cable ) a connection the the switch.
Type the admin information and when entered a Password ( default no password )

To enable the secret command line commands: you have to type the following command: _cmdline-mode on

And press enter. You will get a question. Answer this question with Yes.

If you don’t have a password you will get a popup notification on the CLI Type the code 512900

You get the User View commands if you press ?

<HPv1910>?
User view commands:
  archive        Specify archive settings
  backup         Backup next startup-configuration file to TFTP server
  boot-loader    Set boot loader
  bootrom        Update/read/backup/restore bootrom
  cd             Change current directory
  clock          Specify the system clock
  cluster        Run cluster command
  copy           Copy from one file to another
  debugging      Enable system debugging functions
  delete         Delete a file
  dir            List files on a file system
  display        Display current system information
  fixdisk        Recover lost chains in storage device
  format         Format the device
  free           Clear user terminal interface
  ftp            Open FTP connection
  initialize     Delete the startup configuration file and reboot system
  ipsetup        Specify the IP address of the VLAN interface 1
  lock           Lock current user terminal interface
  logfile        Specify log file configuration
  mkdir          Create a new directory
  more           Display the contents of a file
  move           Move the file
  ntdp           Run NTDP commands
  password       Specify password of local user
  ping           Ping function
  pwd            Display current working directory
  quit           Exit from current command view
  reboot         Reboot system
  rename         Rename a file or directory
  reset          Reset operation
  restore        Restore next startup-configuration file from TFTP server
  rmdir          Remove an existing directory
  save           Save current configuration
  schedule       Schedule system task
  screen-length  Specify the lines displayed on one screen
  send           Send information to other user terminal interface
  sftp           Establish one SFTP connection
  ssh2           Establish a secure shell client connection
  stack          Switch stack system
  startup        Specify system startup parameters
  summary        Display summary information of the device.
  super          Set the current user priority level
  system-view    Enter the System View
  telnet         Establish one TELNET connection
  terminal       Set the terminal line characteristics
  tftp           Open TFTP connection
  tracert        Trace route function
  undelete       Recover a deleted file
  undo           Cancel current setting
  upgrade        Upgrade the system boot file or the Boot ROM program

When you type SYS of system-view. You will get the list of system admin commands.

<HPv1910>system-view
System View: return to User View with Ctrl+Z.
[HPv1910]?
System view commands:
  aaa                      Specify AAA configuration
  acl                      Specify acl configuration information
  archive                  Specify archive settings
  arp                      Specify ARP configuration information
  bootrom-update           bootrom update
  clock                    Specify the system clock
  cluster                  Specify cluster configuration information
  command-privilege        Specify the command level
  configuration            Specify configuration settings
  copyright-info           Copyright information configuration
  cut                      Cut connection
  delete                   Delete function
  dhcp                     DHCP configuration subcommands
  dhcp-snooping            DHCP Snooping
  display                  Display current system information
  domain                   Add domain or modify domain attributes
  dot1x                    Specify 802.1X configuration information
  execute                  Batch Command
  file                     Specify file system configuration information
  ftp                      Specify FTP configuration information
  gratuitous-arp-learning  Gratuitous Arp learning function
  gratuitous-arp-sending   Sending gratuitous-arp packet when receiving
                           different sub-network arp packet function
  habp                     Specify HABP configuration information
  header                   Specify the login banner
  hotkey                   Specify hotkey configuration information
  igmp-snooping            IGMP snooping
  info-center              Specify information center configuration information
  interface                Specify the interface configuration view
  ip                       Specify IP configurations for the system
  job                      Schedule a system task
  jumboframe               Jumboframe command
  lacp                     Configure LACP Protocol
  lldp                     Link Layer Discovery Protocol(802.1ab)
  local-user               Specify local user configuration information
  logfile                  Specify log file configuration
  loopback-detection       Detect if loopback exists
  mac-address              Configure MAC address
  mirroring-group          Specify mirroring-group
  multicast-vlan           Multicast VLAN
  ndp                      Neighbor discovery protocol
  ntdp                     Specify NTDP configuration information
  ntp-service              Specify NTP(Network Time Protocol) configuration
                           information
  ping                     Ping function
  pki                      Specify PKI module configuration information
  port-group               Port group
  public-key               Specify public-key module configuration information
  qos                      Command of QoS(Quality of Service)
  quit                     Exit from current command view
  radius                   Specify RADIUS configuration information
  return                   Exit to User View
  rmon                     Specify RMON
  save                     Save current configuration
  sftp                     Specify SFTP service attribute
  snmp-agent               Specify SNMP(Simple Network Management Protocol)
                           configuration information
  ssh                      Specify SSH (secure shell) configuration information
  ssl                      Specify SSL (Secure Socket Layer) configuration
                           information
  stack                    Switch stack system
  storm-constrain          Port storm-constrain
  stp                      Spanning tree protocol
  super                    Modify super password parameters
  sysname                  Specify the host name
  system-failure           System failure handling method
  system-guard             System guard function
  tcp                      Specify TCP(Transmission Control Protocol)
                           configuration information
  telnet                   Specify TELNET configuration information
  temperature-limit        Set temperature limit
  tftp                     Specify TFTP configuration information
  tftp-server              TFTP Server
  time-range               Specify time-range configuration information
  tracert                  Trace route function
  traffic                  Specify traffic configuration information
  undo                     Cancel current setting
  user-group               Specify user group configuration information
  user-interface           Configure the user terminal interface
  vlan                     Configure VLAN
  voice                    Specify voice VLAN
  web                      Web configuration

124 thoughts on “HP v1910 Secret Commando list ( how to enable it )”

    1. Jhon Castañeda

      Excelent,, work’s!!!! tks!!!
      ————–
      HP Comware Platform Software
      Comware Software, Version 5.20, Release 1513P81

  1. Pingback: Anyone know how to factory reset a 3Com 2824 SFP (HP V1910-24G)

  2. _hidecmd in the system-view unlocks further commands. Looks like you can switch 3com to HP branding with “brand 1910” but I’m afraid to try it.

      1. tried it and now i cannot use firmware > R1111P01
        anyone has an idea how to change the back the branding without having the brand command?

      2. You’re not going to like this, but you can’t.
        I took on the management of a number of v1910’s and saw one that had was stuck on old firmware. Tried updating it and noticed that it refused to work beyond the same firmware level you mentioned. I finally came to the conclusion that my predecessor had been ‘tinkering’ and very likely did the same thing via the secret CLI menu’s.
        The problem is that since there is a shared platform between 3com/HP/H3C, they used similar firmware. But when the design of later models began to diverge, HP removed a feature from their own firmware that would undo the change made to the Device ID. So you’re stuck.
        There is an HP note on this somewhere out there and the purpose that command was designed for. What it doesn’t say is how to fix it if used on a later HP device.
        This may shed more light on the subject: http://tinyurl.com/nrsyjmc
        I ended up having to RMA the device after asking HP nicely.
        OP – please consider adding a warning to the blog that alerts people to this problem.

    1. Are you on the newest firmware? It works for me after following your instructions and getting into the system view. Several commands that start with an underscore are unlocked plus others.
      _cmdline-mode on
      All commands can be displayed and executed. Continue? [Y/N]Y
      Please input password:******
      Warning: Now you enter an all-command mode for developer’s testing, some commands may affect operation by wrong use, please carefully use it with our engineer’s direction.
      system
      System View: return to User View with Ctrl+Z.
      [24G]_hidecmd
      Now you enter a hidden command view for developer’s testing, some commands may
      affect operation by wrong use, please carefully use it with our engineer’s
      direction.
      [24G-hidecmd]

    1. Yes I think, that one works. Only the after a reboot of the v1910 switch the command is lost. and you have to re-type it again to have full access to all commands of the switch.

    1. Indeed the CLI is more used by users i think..and if you have to do more switches in once you can copy / past you configuration now days it’s difficult. Unless you use these command.

      1. Hi!
        How do I copy boot configuration file from one switch to another using CLI so that the new switch uses this when booting?

  3. I found this thread via google because I had a similar problem. I can’t reset my configuration cause the user “Admin” has no roles.
    I fixed it with this steps:
    – connect the switch with console cable
    – start PuTTY (38400 baud)
    – reboot the Switch (cold start)
    – press [CRTL] + [B] while booting
    A hidden menu appears. Choose option “7 – Skip current system configuration”
    I hope it will help another frustrated user of this HP 1910 switch :]
    (Sorry for my english, I’m no native speaker)

    1. Thank you for your input I corrected the english words which were writting incorrectly. It seems I’ve to go test it by myself when i’ve the possibility.

  4. Pingback: Which one is the better one?

  5. Pingback: Quick-tip: “hidden” CLI interface on GS110TP

  6. Pingback: “Hidden” CLI interface on Netgear GS110TP

    1. The default username is admin
      by default there is no password for the CLI. unless you configured a password via the gui. Than you need to use that password to logon via the CLI.

    1. in system-view you have to do the following:
      vlan
      description
      quit
      interface vlan-interface
      description
      ip address
      quit
      interface gigabitethernet
      port access vlan
      it should look like this:
      interface GigabitEthernet1/0/18
      port access vlan 2
      broadcast-suppression pps 3000
      undo jumboframe enable
      stp edged-port enable

      1. Thank you, after looking in the command list for “display” I found it!!! right in front of my eyes

  7. Hi,
    How to remove a VLAN ID of a port and assign a unique VLAN ID (untagged, e.g, VLAN ID 1 untagged for web managment) to the same port?

  8. hi, can i remove/auto set this _cmdline-mode permanently after reboot? i’m setting rancid to run on 1910, instead having diff of configuration i have nothing on log, i think it’s due to this cmdline limitation rancid couldn’t fetch any configuration.
    thx!

    1. Douglas de Azevedo

      Hi Patrick.

      I have the same issue white the HPE 1920, you have success white the Ansible module?

      Best regards.

    1. i’m sorry I am unable to answer your question. The only way to find out is trial and error. Or some other reader of this post has the answer. If i get such switch at my work I wil check for sure if it works. With the same commands as for the 1910 switch.

  9. Hi, I found problem on V1920 . the password 512900 cannot access secret command. Could you please help me find the execute password for V1920. I need to config cli.

      1. Contact HP maybe? If you know the password. Let us know. I just bought 12x V1910 because i couldnt taken the risk

    1. Thanks Mickey – works a treat for V1920. Have been using the V1910 series until now but new switches are same cost. It’s so useful for tracking down network issues compared with using web interface.

  10. Pingback: HP Procurve 1910 Switch commandline | Eric's Tech Blog

  11. No the new 1950 series. It allows IRF up to 4 devices. I would love to have the password for that serie!

    1. Does it have the same type of interface to enter extended commands? Can you post a screen capture of you entering a wrong password and the subsequent messages?

      1. I don’t own any yet…they are ordered…as soon as I get them, i’ll post here.
        But I expect a long delivery…. 🙁

      2. I currently have 4 1950’s in an IRF stack and would love the CLI password, The switch is currently missing a lot of settings in the WebUI (i.e SNMP config for IMC). This could be resolved quickly with the CLI password. I logged a call with HP support and they would not release this information they instead told me to wait until December for a firmware update which will add snmp to the WebUI! Quite frankly this is shocking 🙁
        Below is the output when trying to access the CLI mode.
        ?
        User view commands:
        display Display current system information
        initialize Delete the startup configuration file and reboot system
        ipsetup Configure an IP address for VLAN-interface 1
        password Specify password of local user
        ping Ping function
        poe Power over Ethernet
        quit Exit from current command view
        reboot Reboot operation
        summary Display summary information of the device
        telnet Establish a telnet connection
        undo Cancel current setting
        upgrade Upgrade the system boot file or the Boot ROM program
        xtd-cli-mode Switch to extended CLI mode to display and execute all commands
        (special authorization required)
        xtd-cli-mode
        All commands can be displayed and executed in extended CLI mode. Switch to extended CLI mode? [Y/N]:y
        Password:
        Incorrect password.

        1. What if you type _cmdline-mode on instead of xtd-cli-mode ?
          pass : Jinhua1920unauthorized
          for the fun try : Jinhua1950unauthorized …you never know!

      3. @duffeh, that’s sucks of hp. sadly that they changed the possibility for the lower market with gui / cli solutions that they don’t put it default like the upper level switches where you can access the cli with console / telnet / ssh.
        probably hp won’trelease they password due it made be used of support issues where the technical suport of HP can login in the more advanced CLI. then the end user.

      1. I have 4 of them in stock but didnt had the time to boot them up yet.
        I’ll try to do so today and post back my findings…but I must say…funny password.

  12. oh and can’t you ask HP to take over your screen to enter the mode and set the property?
    In the meanwhile…capture the screeninput ! 🙂

    1. slumpi: do you mean that “foes-bent-pile-atom-ship” works as xtd-cli-mode password on your 1950 switch? may I ask you which model did you test it on? (it does not work on my JG960A…)

      1. It has worked on my 1950’s, but I don’t spefically have the JG960A, I have a 24 port poe, 48 port poe, and a couple of the 48 port non poe units. Works for all of them. The other one HP told me to try was agnipath1950unauthorized if the foes didn’t work. If neither work and you are certain you are typing them exact call and open a ticket, the way to get the password is tell them you have to have SNMP enabled. Level 1 will take a day scratching their heads before they send to level 2, level 2 will want on your system but then they’ll tell you the password. At least that’s how I did it.

      2. Just wanted to add that the password Andy provided “Agnipath1950unauthorized” works on some 1950 switches prior to the foes-bent-pile-atom-ship password. My firmware is lower than Andy’s and the Agnipath1950unauthorized works, just be sure to capitalize the A!
        I figured this out from looking at the other password for the other switches referenced and they all start with caps. Hope this helps some one. Thanks Andy for posting this!

  13. Pingback: Hp 1910v 1Gbps Anahtar ayarlarının Yapılması (3-Com anahtar) » Süleyman Uzun

  14. I tried “foes-bent-pile-atom-ship” at our HP 1950-48G-PoE+ with the xtd-cli-mode.
    It still throws “Incorrect Password”.
    Any help?

  15. If you’re having problems getting in to xtd-cli-mode on the HP 1950’s – then upgrade the firmware – the SSE/earlier release has a different password to what’s listed here

  16. Sorry for the late reaction :
    JG963A (the 48 ports with POE+)
    Next year i’ll be buying the 24 ports version as well …

  17. Hola,buenos días
    Solicito de su apoyo
    Mi caso es el siguiente:
    Tengo creadas 6 VLAN las cuales requiero se puedan comunicar entre algunas, por ejemplo la VLAN 2 se comunique con la VLAN 4 pero no con las demás, las VLAN están creadas en switch HP 1910-48 y en switch HP 1920-24G, sin embargo de las 6 VLAN que tengo creadas solo algunas hacen ping con otras, ejemplo PC1 conectada a VlAN 3 (PUERTA DE ENLACE 192.168.16.33) en puerto 2 de l switch HP 1920 hace ping a PC2 conectada a VALN 2 (puerta de enlace 192.168.16.65) en puerto 2 del switch HP 1910-48, pero de PC2 a PC1 no regresa el ping. Estos dispositivos están conectados por medio de un puerto troncal del switch HP 1920-24 en puerto 24 al switch HP 1910-48 al puerto Gigabit 52.
    Mi duda en concreto es saber como comunicar VLAN diferentes. Pues entre las mismas VLAN si hay comunicación.

  18. I have a probleme in my configuration in switch HP PoE+ v1910 : the probleme is my Router altai poe+ can’t have power frome my switch

  19. Hello Guys,
    1950 switches are basicly 5130ei switches with 1950 software running on it, i have installed the 5130 firmware and it works like a charm 😉 however you still have to enter the password.

  20. Mohamed Amer

    Hello Guys,
    I have Cisco switch 2960 and i created vlan on it and i have hp switch 1920 and i have different vlan created on it i need how can i allow the traffic and allow all this networks to access each other what should i do should i do trunk between them or what and how can i do that ?
    what can i do if i don’t remember the GUI password i need to reset it ?
    what is the default IP address for the switch ?
    what if i have DHCP server how can i know the switch IP ?

    1. you can make a vlan trunk to both switches.
      – hp > trunk or lacp ( avoid in this case lacp )
      – hp > untag 1 native ( vlan 1 default) and other vlans you need to tag to the trunk
      – cisco > make a trunk poort
      – cisco > tag all vlan’s to the trunk port.
      – you can reset the password by using a hack on the boot.(http://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/12040-pswdrec-2900xl.html)
      – there is no default ip address. it will receive an IP via the DHCP or you have to configure it.
      – you can use best a tool like netscan to find your switch and select it on mac address.
      – in the Dhcp it’s most of the time the last IP address which is taken. Or you have to know the mac address of the device to look it up in the DCHP.
      I hope it will help you

      1. Mohamed Amer

        Thanks a lot Fred for your reply can you write the command line for each device when you have free time.

  21. Pingback: HP Switch Serie 1900 login methods | Glazenbakje's Weblog

  22. Hi All,
    I have four ip pools on my 1910:
    192.168.1.0/24
    192.168.2.0/24
    192.168.3.0/24
    192.168.4.0/24
    and want to connect these so it is possible to ping from 192.168.1.0/24 to 192.168.4.0/24 or 192.168.3.0/24 etc etc how can can realize this with ipv routing?
    Thanks a lot for your reply.

    1. My setup:
      VLAN ID 1 192.168.0.1/24
      VLAN ID 10 192.168.1.254/24
      VLAN ID 20 192.168.2.254/24
      VLAN ID 30 192.168.3.254/24
      VLAN ID 40 192.168.4.254/24
      VLAN ID 50 192.168.5.254/24
      VLAN Port Detail
      GE1/0/44 1 10,20,30,40,50 Hybrid 1
      GE1/0/45 1 10,20,30,40,50 Hybrid 1
      GE1/0/46 1 10,20,30,40,50 Hybrid 1
      GE1/0/47 1 10,20,30,40,50 Hybrid 1
      GE1/0/48 1 10,20,30,40,50 Hybrid 1
      Active route table
      Destination IP Address Mask Protocol Preference Next Hop Interface
      0.0.0.0 0.0.0.0 Static 60 192.168.0.254 Vlan-interface1
      127.0.0.0 255.0.0.0 Direct 0 127.0.0.1 InLoopBack0
      127.0.0.1 255.255.255.255 Direct 0 127.0.0.1 InLoopBack0
      192.168.0.0 255.255.255.0 Direct 0 192.168.0.1 Vlan-interface1
      192.168.0.1 255.255.255.255 Direct 0 127.0.0.1 InLoopBack0
      192.168.1.0 255.255.255.0 Direct 0 192.168.1.254 Vlan-interface10
      192.168.1.254 255.255.255.255 Direct 0 127.0.0.1 InLoopBack0
      192.168.2.0 255.255.255.0 Direct 0 192.168.2.254 Vlan-interface20
      192.168.2.254 255.255.255.255 Direct 0 127.0.0.1 InLoopBack0
      192.168.3.0 255.255.255.0 Direct 0 192.168.3.254 Vlan-interface30
      192.168.3.254 255.255.255.255 Direct 0 127.0.0.1 InLoopBack0
      192.168.4.0 255.255.255.0 Direct 0 192.168.4.254 Vlan-interface40
      192.168.4.254 255.255.255.255 Direct 0 127.0.0.1 InLoopBack0
      192.168.5.0 255.255.255.0 Direct 0 192.168.5.254 Vlan-interface50
      192.168.5.254 255.255.255.255 Direct 0 127.0.0.1 InLoopBack0

  23. Hi, I would like to have two VLANs on my switch hp 1920-48, which get ip address from DHCP server.
    VLAN1 get address from DHCP from network 10.113.0.0 255.255.0.0
    VLAN10 get address from DHCP from network 172.16.1.0 255.255.255.0
    I have already made two scopes on DHCP server, and I also have done some configurations for all this, but now I’m stuck here.
    Please any help…
    This is my configuration file:
    [SI-MED-ID-0018]dis cur
    #
    version 5.20.99, Release 1113
    #
    sysname SI-MED-ID-0018
    #
    ftp server enable
    #
    dhcp relay server-group 1 ip 10.113.3.50
    dhcp relay server-group 10 ip 172.16.1.1
    #
    domain default enable system
    #
    ipv6
    #
    gvrp
    #
    ssl version ssl3.0 disable
    #
    password-recovery enable
    #
    acl number 3001
    rule 1 permit ip destination 10.113.0.0 0.0.255.255
    acl number 3010
    rule 10 permit ip destination 172.16.1.0 0.0.0.255
    #
    vlan 1
    #
    vlan 10
    #
    domain system
    access-limit disable
    state active
    idle-cut disable
    self-service-url disable
    #
    traffic classifier pc1 operator and
    if-match acl 3001
    traffic classifier pc10 operator and
    if-match acl 3010
    #
    traffic behavior deny_stats_2
    filter deny
    traffic behavior deny_stasts
    filter deny
    traffic behavior deny_stats
    #
    qos policy pc1_deny
    classifier pc1 behavior deny_stats
    qos policy pc1
    qos policy pc10
    classifier pc10 behavior deny_stats_2
    #
    user-group system
    group-attribute allow-guest
    #
    local-user admin
    #
    stp mode rstp
    stp enable
    #
    interface Bridge-Aggregation1
    port link-type trunk
    port trunk permit vlan 1 10
    link-aggregation mode dynamic
    #
    interface NULL0
    #
    interface Vlan-interface1
    ip address 10.113.2.14 255.255.0.0
    dhcp select relay
    dhcp relay server-select 1
    dhcp relay information enable
    #
    interface Vlan-interface10
    ip address 172.16.1.14 255.255.255.0
    dhcp select relay
    dhcp relay server-select 10
    dhcp relay information enable
    #
    interface GigabitEthernet1/0/1
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/2
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/3
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/4
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/5
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/6
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/7
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/8
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/9
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/10
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/11
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/12
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/13
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/14
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/15
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/16
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/17
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/18
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/19
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/20
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/21
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/22
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/23
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/24
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/25
    port access vlan 10
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/26
    port access vlan 10
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/27
    port access vlan 10
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/28
    port access vlan 10
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/29
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/30
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/31
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/32
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/33
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/34
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/35
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/36
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/37
    port link-type hybrid
    port hybrid vlan 1 10 tagged
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/38
    port link-type hybrid
    port hybrid vlan 1 10 tagged
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/39
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/40
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/41
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/42
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/43
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/44
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/45
    port link-type trunk
    port trunk permit vlan 1 10
    port auto-power-down
    stp edged-port enable
    port link-aggregation group 1
    #
    interface GigabitEthernet1/0/46
    port link-type trunk
    port trunk permit vlan 1 10
    port auto-power-down
    stp edged-port enable
    port link-aggregation group 1
    #
    interface GigabitEthernet1/0/47
    port link-type trunk
    port trunk permit vlan 1 10
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/48
    port link-type trunk
    port trunk permit vlan 1 10
    port auto-power-down
    stp edged-port enable
    #
    interface GigabitEthernet1/0/49
    stp edged-port enable
    #
    interface GigabitEthernet1/0/50
    stp edged-port enable
    #
    interface GigabitEthernet1/0/51
    stp edged-port enable
    #
    interface GigabitEthernet1/0/52
    stp edged-port enable
    #
    ip route-static 10.113.0.0 255.255.0.0 Vlan-interface1 10.113.3.50
    ip route-static 172.16.1.0 255.255.255.0 Vlan-interface10 172.16.1.1
    #
    undo info-center logfile enable
    #
    dhcp enable
    #
    ssh server enable
    #
    qos vlan-policy pc1 vlan 1 inbound
    #
    ip https enable
    #
    load xml-configuration
    #
    user-interface aux 0
    authentication-mode scheme
    user-interface vty 0 15
    authentication-mode scheme
    #
    return
    [SI-MED-ID-0018]

    1. Remove your bridge command and test. If that doesnt work, remove the ACL, QoS and Traffic commands. Otherwise, everything else you have is very similar to my setup. I have two dhcp servers, one windows dhcp and the other is a Sonicwall router.

  24. i want turn off all switch no the interface, i know how use shutdown-interval but i don’t how turn off the switch, can you help me please

  25. Awesome article.. helped me a lot! Thanks man! 🙂
    One thing I couldn’t figure out.. I wanted to deactivate the status-messages for “link status UP/DOWN” since they are more or less spamming my Syslog-Server. I used the command “undo enable log updown” on every port (“int g1/0/1” -> “int g1/0/2” ..and so on).
    But, is there a way to do this with just one command for all the ports?

  26. Hi all! the new 1920s is the way to go!…. or not… i ordered one, and i miss an important feature: The console port is gone missing! I will call HP, maybe its hidden behind the front plate sticker…. help!

  27. Amazing thread guys…..Thanks to Fred in particular!
    I’ve created VLANs and assigned to ports successfully on my HP 1910-24G using the CLI
    Two questions:
    1. Can you explain how to create trunk port containing all VLANs
    2. How can I change the default VLAN

    1. For me it’s been a while I’ve seen this switch. Best advice what i can give you to make 1 trunk via the gui and read out the configuration from the CLI.

  28. Thank you! I was after a way to add port descriptions to at 1910-24G when I came across this post. Awesome!

  29. Pingback: Bookmarks for 9 apr 2013 through 11 apr 2013 | jtheo

  30. Matthew Heathcote

    im trying to display information on the SFP adapters for my switch but cant seem to work out the cli command, if i use the display interface cmd it tells me its picked it up but looking for information such as the serial number of the adapter

  31. is it possible to set the arp-age by cmd for the 1910 or 1920 switch? And what would the cmd be?

    1. I’m not sure about it. Does the HP documentation write about it, to configure it in the GUI. if zo that you can find the commands back in the CLI.

      1. Hello, is there any way to set multiple ip adress to one vlan?
        I want the hp 1910 switch to be default gateway for some subnets in one vlan.
        Thank you for the topic.

        1. Hi Alex,

          The HP 1910 has some L3 capabilities. How ever it doesn’t support IP Routing. You can set the default Gateway to your switch IP address for the clients.
          But it’s not possible to add a secondary ip address to the switch. I would suggest to create a router on a stick solution where you let your router or firewall do the routing for you. Or upgrade to a HPE OfficeConnect 1920S Switch Series which is an advanced lite Layer 3 smart managed switch. I hope this help you further out with your question

          1. Thank you a lot, Fred. Congrats with your new website, imagine the size of my eyes whem the previous said “404” when I was going to leave you a comment 😀

            Luckily, I am waiting to get those 1920 switches soon enough. That’s especially good, because that router-on-a-stick model would rather make me administrating more vendors or leave me only 100 MB/sec channel.

            By the way, would you be so kind to send me an email from yours, just to ask you a couple more questions? I assure you I won’t bother you too much =)

  32. Pingback: HPE OfficeConnect 1950スイッチをシリアルケーブルで設定できるのか? – OSAKANA TAROのメモ帳

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.