Yesterday I was been working in Belgium and I had to configure a router for an connection to an local ISP over there. This ISP was XS4ALL Belgium. Below you will find a basic configuration. how to connect to the internet connection in Belgium. This configuration is for and ADSL connection.
Interface ATM0
description XS4ALL Business ADSL <phonenumber>
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip route-cache policy
load-interval 30
no atm ilmi-keepalive
pvc 8/35
oam-pvc manage 30
oam retry 6 2 10
encapsulation aal5mux ppp dialer
dialer pool-member 10
!
dsl operating-mode auto
hold-queue 224 in
interface Dialer10
description <phonenumber or location >
ip address negotiated
no ip redirects
no ip proxy-arp
ip mtu 1492
ip flow ingress
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 10
dialer idle-timeout 0
dialer persistent delay 60
dialer-group 10
no cdp enable
ppp authentication chap callin
ppp chap hostname < login@XS4ALL >
ppp chap password < password >
ip route 0.0.0.0 0.0.0.0 Dialer10
ip nat inside source route-map RMP_DIALER10_OVERLOAD interface Dialer10 overload
ip access-list extended ACL_DIALER10_OVERLOAD
deny ip < local Lan IP > < wildcard > < VPN LAN IP > < wildcard >
permit ip < local Lan IP > < wildcard > any
access-list 110 remark ———————————————————
access-list 110 remark Dialer-list 10, Dialer10 (EVONET)
access-list 110 remark ——————————————————–
access-list 110 permit ip any any
dialer-list 10 protocol ip list 110
route-map RMP_DIALER10_OVERLOAD permit 10
match ip address ACL_DIALER10_OVERLOAD
match interface Dialer10
Every time I come to glazenbakje.wordpress.com you have another exciting post up to read. One of my friends was telling me about this topic a couple weeks ago. I think I will e-mail my friend the url here and see what they say.